In the global section you can define settings that relate to all the libraries that are currently loaded.

Global Setup

Here your can define which setup file should be used. This controls which Global Config to load and edit.

Setup configuration

Default values

First let’s have at look what default config value you can set:

Color Code

The Color Code is a visual help to distinguish between the path items. Each color represents a different type of the items that you can drag'n'drop around to build the folder structure and naming convention. Some values are predefined, some are only known during the ingest phase and others can be set manually by you.

File path definitions

This is where you set the naming convention and file structure on disk.
You need to define the file path patterns so the software knows where to store the elements file data. These two path patterns are the most important path patterns that the transcoding template will use.

Types of path patterns

Which path patterns will be used depends on the output format and the transcoding templates setting for each library. There are two types of path patterns.

Single files

Movie files or single textures files without frame count.

/some/path/to/element.mov
/some/path/to/element.exr
/some/path/to/element_v01.exr

Example when the sequence file pattern is used:

Cory process of a movie file
my-movie-file.mov -> fire_000023.mov

Sequence files

Renderings or sequences with frame counter.

/some/path/to/element.1001.exr
/some/path/to/element_1001.exr

Example when the sequence file pattern is used:

For a movie file (source is a single file) that will be transcoded to a frame sequence with frame counter.my-movie-file.mov > fire_000023.1001.exr

Use '#' for the frame counter. The default frame count padding is 4.

Path Patterns

You can create a so called path pattern. A pattern is assembled by placeholder values. These values get resolved into the actual value on ingest/render time.

The reason is that we don’t know some values at this time because they are dependent on the element that you want to ingest. For example, the width and height is depending on the source item.

This might look a little bit weird at the beginning, but this system gives you full control over how to assemble your naming convention. You will see the benefit of it in a second.

Example: resolution

Our source image is an image of a flame with the resolution of width 1920 and height 1080.

We create a path pattern to define the naming convention of the resolution folder as followed:

resolution_pattern : <width>x<height>
If we now ingest the element, the pattern gets resolved to: 1920x1080

Now let’s take it a step further.

We can define custom path values in the path values section.
These values get included in the values that can get resolved by the resolver.

Lets create a path value:
colorspace : linear

and update the pattern from before:
resolution_pattern : abc_<width>x<height>_<colorspace>

This gets resolved to: abc_1920x1080_linear

Notice the tag we added at the end? <colorspace> is a custom pattern tag.
The resolver will look at the path value colorspace and use its value linear

If we create a library transcoding template that creates a thumbnail preview for our elements, we can overwrite the path value <colorspace> by another value. For example: srgb
The path pattern for this transcoding template gets now resolved to: abc_1920x1080_srgb

Example: category

Let's create a path pattern for defining the naming convention for folder of the element.

Create a new path pattern:
element_name : <category.base.name>_<element.number>

In the ingest view we decide that the category of the element is flame
The base (top parent) category of flame is fire. Because a flame is a part of a fire.

This means that <category.name> resolves to flame and <category.base.name> resolves to fire

What about <element.number>?
This is one of the predefined values. These predefined values are values that are only known once an element is ingested because the values are dependent on the elements data.

If we now ingest a new fire element and there are already 230 fire elements in the database, the element number will increase by +1. Thus the <element.number> will resolve to 231.

So finally: <category.base.name>_<element.number> resolves to flame_231.

Path Values

Path values are used to resolve the values of the path patterns depending on the element that will be ingested or rendered. Some values are known once we actually know the data that we want to ingest, others values can be set by you (custom values). The custom values can be overwritten in the library and the transcoding templates.

Predefined path values

The predefined values are used as placeholders in the path patterns. They are divided into separate predefined groups that will be commonly used. For each group you can access the sub-keys.

Example
If you want to get the width value of the source element you ingest, you access the group resolution and the sub-key width in the path pattern like this: <resolution.width>. This will resolve the source image width value for you.

Example: element

Path of element that we want to ingest:
/some/path/to/file.%04.exr
It is a sequence of OpenEXR files that contain a picture of a flame.
The first frame of the sequence is 1001 and last frame is 1042.
Each image has a resolution of width 1920, a height of 1080 and a pixel aspect ration of 1.
In the library there are already 22 fire elements.

In the ingest view we decide that the category of the element is flame.
The base (top parent) category of flame is fire. Because a flame is a part of a fire.

In this overview you can see how each of the predefined values would be resolved into the actual value:

Custom path values

These are the values that you can define. These custom path values get resolved in the path patterns.

Examples

server : /path/to/server
library_name: my-element

If you use path patterns that reference path values you have to make sure that these values exist in the path values section. If something can not be resolved because values are not defined, the ingest or rendering of proxies will fail and you will see an error message.

Overwrite pattern & values

The server path or the folder where the library data is stored might chance for each library.
Overwriting path pattern and path values is based on the concept that you only need to overwrite values for each library, which reduced the complexity and misalignment of the file structure.

This gives you the control to setup global conditions for all libraries and you only need to change one or two values for each library.